SignCut Pro 2 includes plugin installers that are automatically launched during the standard installation process. These plugins are also accessible anytime via the Help menu within the software.


The plugins not only allow users to export designs directly to SignCut Pro 2 without manually saving the vector file, but it also provides easy creation of registration marks, contour lines and other quick functions to prepare the design for contour cutting. 


We support the most commonly used design software applications, including CorelDRAW, Adobe Illustrator, and Inkscape. Please refer to the list below to ensure your software version is compatible with the latest published version of SignCut Pro 2 (v.1.485).


Supported Software Versions

CorelDRAW

  • CorelDRAW X6 – 32bit / 64bit
  • CorelDRAW X7 – 32bit / 64bit
  • CorelDRAW X8 – 32bit / 64bit
  • CorelDRAW 2017 – 32bit / 64bit
  • CorelDRAW 2018 – 32bit / 64bit
  • CorelDRAW 2019 – 32bit / 64bit
  • CorelDRAW 2020 – 32bit / 64bit
  • CorelDRAW 2021 – 32bit / 64bit
  • CorelDRAW 2022 – 32bit / 64bit
  • CorelDRAW 2023 – 32bit / 64bit
  • CorelDRAW 2024 – 32bit / 64bit
  • CorelDRAW PE

Inkscape

  • Inkscape version < 1.0
  • Inkscape version ≥ 1.0

Adobe Illustrator

  • Illustrator CS6 – 32bit / 64bit
  • Illustrator CC 2013.0.0 (17.0.0) – 32bit / 64bit
  • Illustrator CC 2013.1.0 (17.1.0) – 32bit / 64bit
  • Illustrator CC 2014.0.0 (18.0.0) – 32bit / 64bit
  • Illustrator CC 2014.1.0 (18.1.0) – 32bit / 64bit
  • Illustrator CC 2015.0.0 (19.0.0) to 2015.3.1 (20.1.0) – 32bit / 64bit
  • Illustrator CC 2017.0.0 (21.0.0) to 2017.1.0 (21.1.0) – 32bit / 64bit
  • Illustrator CC 2018.0.0 (22.0.0) – 32bit / 64bit
  • Illustrator CC 2019.0.0 (23.0.0) – 32bit / 64bit
  • Illustrator 2020.0.0 (24.0.0) to 2020.3.0 (24.3.0) – 32bit / 64bit
  • Illustrator 2021.0.0 (25.0.0) to 2021.5.0 (25.5.0) – 32bit / 64bit
  • Illustrator 2022.0.0 (26.0.0) to 2022.5.0 (26.5.0) – 32bit / 64bit
  • Illustrator 2023.0.0 (27.0.0) to 2023.4.1 (27.4.1) – 32bit / 64bit
  • Illustrator 2024.0.0 (28.0.0) – 32bit / 64bit


To install the plugins manually, follow these steps:


1. Open SignCut

2. Click Help, then select Reinstall Export-Plugins.

(Please make sure that the design software is closed before installing the plugins.)



Follow the instructions to proceed with plugin installation.



3. Click the dropdown list icon to view all the list of available plugins.


4. Once the correct name and version of the design software has been selected, click Install Plugin to proceed.

(To know the version of the design software, please open the program, then click Help, and then select About Inkscape/Corel DRAW/Illustrator.)


5. Click Close 



Once done, you may now export the file from design software to SignCut Pro 2 and ready for cutting.